Rfid Animal Tracking & Identification Tags

Our innovative RFID animal ear tag products are completely interoperable with standardized factors and systems. Their technology has been used to some extent for animal tracking, and the tag has also become a dominant player in tolls and various industrial applications.

Already widely used in the livestock industry, the RFID animal tag is proving its value, making more use of it than has been realized in the past as it is deployed across the entire food chain. These new livestock tracking RFID systems use the LF, UHF RFID tag to monitor animal movements in order to identify feed and travel habits and even monitor heart rate.

D.O RFID tag manufacturer produces various RFID sheep tags, RFID goat tags, RFID animal ear tags to help control and protect livestock, pets, lab animals and food chain products. In addition, RFID glass tags normally used for pets and UHF cattle tags are typically made of thermoplastic polyurethane or polyester and are regularly used for applications requiring high anti-collision rates.

While the FDX-B RFID animal tag has been adopted by the United States and several other countries for livestock (RFID Cattle tag)-most nations have not fully adopted the standard and, in fact, the 125 kHz FDX-A tag is widely used in many countries with impressive results. Outside the USA, local and national governments increasingly specify RFID tags for livestock disease management and apply pressure for food traceability that is difficult to obtain, except for RFID. Despite these challenges, our LF 134 kHz HDX RFID still promises top-notch costs: improving the overall performance ratio for the livestock industry.

Our RFID animal tags, mainly based on a fully national ID system, can track the source of the end products, which can now be easily identified, traced and recalled if necessary. It is important to note that depending on the application and type of RFID tag used, each RFID animal tag with an electronic RFID chip and a chip with a UID number can be read by the RFID animal tag reader and the data can be obtained. This type of tag is a passive RFID tag, it has no battery and no internal electrical energy source. Low frequency 125 kHz or 134khz (LF) RFID/EID tags for cattle are considered passive tags because they have no battery or electricity of their own. Because passive RFID tags do not require a battery power source, they can be much smaller, much cheaper, and have a longer life.

D.O RFID tag manufacturer specializes in presenting a wide range of RFID tags, RFID tags, smart cards and RFID readers that are suitable for any smart application We pay a lot of attention to maintaining world-class quality and are therefore a reliable industry title for our RFID products and low-cost RFID animal tags. The sellers can contact us immediately to supply RFID goods to meet the growing demand from customers throughout the livestock industry.

Our innovative RFID animal ear tag products are completely interoperable with standardized factors and systems. Their technology has been used to some extent for animal tracking, and the tag has also become a dominant player in tolls and various industrial applications.

Already widely used in the livestock industry, the RFID animal tag is proving its value, making more use of it than has been realized in the past as it is deployed across the entire food chain. These new livestock tracking RFID systems use the LF, UHF RFID tag to monitor animal movements in order to identify feed and travel habits and even monitor heart rate.

D.O RFID tag manufacturer produces various RFID sheep tags, RFID goat tags, RFID animal ear tags to help control and protect livestock, pets, lab animals and food chain products. In addition, RFID glass tags normally used for pets and UHF cattle tags are typically made of thermoplastic polyurethane or polyester and are regularly used for applications requiring high anti-collision rates.

While the FDX-B RFID animal tag has been adopted by the United States and several other countries for livestock (RFID Cattle tag)-most nations have not fully adopted the standard and, in fact, the 125 kHz FDX-A tag is widely used in many countries with impressive results. Outside the USA, local and national governments increasingly specify RFID tags for livestock disease management and apply pressure for food traceability that is difficult to obtain, except for RFID. Despite these challenges, our LF 134 kHz HDX RFID still promises top-notch costs: improving the overall performance ratio for the livestock industry.

Our RFID animal tags, mainly based on a fully national ID system, can track the source of the end products, which can now be easily identified, traced and recalled if necessary. It is important to note that depending on the application and type of RFID tag used, each RFID animal tag with an electronic RFID chip and a chip with a UID number can be read by the RFID animal tag reader and the data can be obtained. This type of tag is a passive RFID tag, it has no battery and no internal electrical energy source. Low frequency 125 kHz or 134khz (LF) RFID/EID tags for cattle are considered passive tags because they have no battery or electricity of their own. Because passive RFID tags do not require a battery power source, they can be much smaller, much cheaper, and have a longer life.

D.O RFID tag manufacturer specializes in presenting a wide range of RFID tags, RFID tags, smart cards and RFID readers that are suitable for any smart application We pay a lot of attention to maintaining world-class quality and are therefore a reliable industry title for our RFID products and low-cost RFID animal tags. The sellers can contact us immediately to supply RFID goods to meet the growing demand from customers throughout the livestock industry.

Our innovative RFID animal ear tag products are completely interoperable with standardized factors and systems. Their technology has been used to some extent for animal tracking, and the tag has also become a dominant player in tolls and various industrial applications.

Already widely used in the livestock industry, the RFID animal tag is proving its value, making more use of it than has been realized in the past as it is deployed across the entire food chain. These new livestock tracking RFID systems use the LF, UHF RFID tag to monitor animal movements in order to identify feed and travel habits and even monitor heart rate.

D.O RFID tag manufacturer produces various RFID sheep tags, RFID goat tags, RFID animal ear tags to help control and protect livestock, pets, lab animals and food chain products. In addition, RFID glass tags normally used for pets and UHF cattle tags are typically made of thermoplastic polyurethane or polyester and are regularly used for applications requiring high anti-collision rates.

While the FDX-B RFID animal tag has been adopted by the United States and several other countries for livestock (RFID Cattle tag)-most nations have not fully adopted the standard and, in fact, the 125 kHz FDX-A tag is widely used in many countries with impressive results. Outside the USA, local and national governments increasingly specify RFID tags for livestock disease management and apply pressure for food traceability that is difficult to obtain, except for RFID. Despite these challenges, our LF 134 kHz HDX RFID still promises top-notch costs: improving the overall performance ratio for the livestock industry.

Our RFID animal tags, mainly based on a fully national ID system, can track the source of the end products, which can now be easily identified, traced and recalled if necessary. It is important to note that depending on the application and type of RFID tag used, each RFID animal tag with an electronic RFID chip and a chip with a UID number can be read by the RFID animal tag reader and the data can be obtained. This type of tag is a passive RFID tag, it has no battery and no internal electrical energy source. Low frequency 125 kHz or 134khz (LF) RFID/EID tags for cattle are considered passive tags because they have no battery or electricity of their own. Because passive RFID tags do not require a battery power source, they can be much smaller, much cheaper, and have a longer life.

D.O RFID tag manufacturer specializes in presenting a wide range of RFID tags, RFID tags, smart cards and RFID readers that are suitable for any smart application We pay a lot of attention to maintaining world-class quality and are therefore a reliable industry title for our RFID products and low-cost RFID animal tags. The sellers can contact us immediately to supply RFID goods to meet the growing demand from customers throughout the livestock industry.

Our innovative RFID animal ear tag products are completely interoperable with standardized factors and systems. Their technology has been used to some extent for animal tracking, and the tag has also become a dominant player in tolls and various industrial applications.

Already widely used in the livestock industry, the RFID animal tag is proving its value, making more use of it than has been realized in the past as it is deployed across the entire food chain. These new livestock tracking RFID systems use the LF, UHF RFID tag to monitor animal movements in order to identify feed and travel habits and even monitor heart rate.

D.O RFID tag manufacturer produces various RFID sheep tags, RFID goat tags, RFID animal ear tags to help control and protect livestock, pets, lab animals and food chain products. In addition, RFID glass tags normally used for pets and UHF cattle tags are typically made of thermoplastic polyurethane or polyester and are regularly used for applications requiring high anti-collision rates.

While the FDX-B RFID animal tag has been adopted by the United States and several other countries for livestock (RFID Cattle tag)-most nations have not fully adopted the standard and, in fact, the 125 kHz FDX-A tag is widely used in many countries with impressive results. Outside the USA, local and national governments increasingly specify RFID tags for livestock disease management and apply pressure for food traceability that is difficult to obtain, except for RFID. Despite these challenges, our LF 134 kHz HDX RFID still promises top-notch costs: improving the overall performance ratio for the livestock industry.

Our RFID animal tags, mainly based on a fully national ID system, can track the source of the end products, which can now be easily identified, traced and recalled if necessary. It is important to note that depending on the application and type of RFID tag used, each RFID animal tag with an electronic RFID chip and a chip with a UID number can be read by the RFID animal tag reader and the data can be obtained. This type of tag is a passive RFID tag, it has no battery and no internal electrical energy source. Low frequency 125 kHz or 134khz (LF) RFID/EID tags for cattle are considered passive tags because they have no battery or electricity of their own. Because passive RFID tags do not require a battery power source, they can be much smaller, much cheaper, and have a longer life.

D.O RFID tag manufacturer specializes in presenting a wide range of RFID tags, RFID tags, smart cards and RFID readers that are suitable for any smart application We pay a lot of attention to maintaining world-class quality and are therefore a reliable industry title for our RFID products and low-cost RFID animal tags. The sellers can contact us immediately to supply RFID goods to meet the growing demand from customers throughout the livestock industry.

Specification

Type: Contactless R/O or R/W

Operating Frequency: LF(125KHz / 134.2KHz) or HF (13.56MHz)

 IC Available at 13.56MHz:

HF: I-CODE (ISO 15693-3), Mifare 1K Classic (Mifare 1K S50), Mifare 1K EV1, Mifare 4K S70, Mifare 4K EV1, Mifare S20, Mifare Ultralight, Mifare Ultralight EV1, Ultralight C, Mifare DesFire 2K / 4K / 8K, Mifare plus 2K / 4K / 8K, Tag-it™ HF-I (ISO 15693-3), SmartMX, others upon request

NFC: NTag210, NTag213, NTag215, Ultralight ULT EV1, Ultralight-C, NTag216, NTag203, Sony FeliCa Lite-S, ST25TA02K, others upon request 

 IC Available at 125KHz:EM4200, EM4100, EM4102, EM4305, EM4001, T5577, Hitag1, Hitag2, Hitag S, Hitag-u Advanced, TK4100, GK4100, others upon request

 IC Available at 134.2KHz: HITAG-S 256 Bit, HITAG-S 2048 Bit, others upon request 

Size: chip:dia.32mm, thickness:6mm

Reading Distance: Up to 5~20cm (Depends on reader and IC type)

 Material: TPU / PU Anti-allergic Material

Operating Temperature: -40º C to +80º C

Storage Temperature: -40º C to +100º C

Competitive Advantage

1.         Waterproof IP 68

2.         Anti-allergic Material

3.         Read distance: Up to 5~20cm (Depends on reader and IC type)

4.         Flexible & easy-to-wear

5.         100, 000 times reading & writing

6.         Also Available: Custom colors, number printing

D.O RFID tag manufacturer is able to design and develop RFID tags and RFID readers in different sizes and different shapes for your different requirement. For more info about RFID products please kindly visit our website www.dorfidtag.com or email us at info@dorfidtag.com, we will contact you as soon as possible.