RFID proximity card reader kit RFID card reader with keypad
|Color||Black / White|
When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data
@ Wiegand 26bits/ Wiegand34bits Standard Format Data Output
@ Less than 0.2 second Response Speed
@ Less than 0.5 seconds Proximity Time Distance:
@ 2-15cm Proximity Range
@ Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) and Mifare 1 Card (13.56 MHz Frequency)
@ -25; Cto 75; C Ambient Temperature, 10%-90% Ambient Humidity
@ Built-in Antenna
@ Built-in LED (Double Color LED)
@ Built-in Loud Speaker (Buzzer)
@ DC 12V Working Voltage, 70mA Working Current
@ 100 Meters Communication Distance
@ Real Time Data Transfer
@ Black Color
@ PVC Case Material (Black Resin for Water-Proof Function)
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Red DC 5V-16V
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Just fill out the following form, our expert team will contact and make sure you get the highest level of help.
Customized products as your request.
NXP MIFARE DESFire EV2 2K card use for smart paper tickets, key fobs and mobile ticketing based on Near Field Communica...>READ MORE...
NXP ntag215 RFID chip
The smallest size
Develop new ways to engage customers at your next event or festival with customised RFID wristbands and bracelets.READ MORE...
Our cheapest micro RFID Tags are special designed in small sizes such as Dia 9mm, 8*15mm, 6*20mm, 7*10mm, 12*12mm etc.READ MORE...
These NFC smart watches are not only worn through band around the wrist but can also be used as the perfect replacement ...>READ MORE...
Over the past few year, D.O RFID group worked for the NFC tags, NFC payment card, NFC wristbands. but this year we annou...>READ MORE...
The best wearable payment devices Smartwatch With NFC and bluetoothREAD MORE...
D.O RFID tag manufacturer produced a wide range of NFC tags that can be used for any purpose. Our NFC tag only use offic...>READ MORE...
Copyright © 2014-2018 D.O RFID TAG company.All Right Reserved.