D.O RFID TAG company
D.O RFID TAG company is a RFID card manufacturers & factory, professional RFID card manufacturers , NFC tags suppliers and RFID Wristband company in shenzhen china for 15 years — Source Quality Products and Enjoy Efficient Service.

Wiegand34 RFID Smart Card Reader Door Access Controller

Wiegand34 RFID Smart Card Reader Door Access Controller

Wiegand34 RFID Smart Card Reader Door Access Controller

ModelDO-15
ColorBlack / White
VoltageDC9~16V
Current≤100mA
Ambient Temperature-25°C~75°C
Reading Range5~15CM
Output FormatWiegand,RS485/232
Card TypeEM-ID/Mifare-IC
Comunication DistanceWG≤100M,RS485≤1200M


Usage:
When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data
Specification
@ Wiegand 26bits/ Wiegand34bits Standard Format Data Output
@ Less than 0.2 second Response Speed
@ Less than 0.5 seconds Proximity Time Distance:
@ 2-15cm Proximity Range
@ Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) and Mifare 1 Card (13.56 MHz Frequency)
@ -25; Cto 75; C Ambient Temperature, 10%-90% Ambient Humidity
@ Built-in Antenna
@ Built-in LED (Double Color LED)
@ Built-in Loud Speaker (Buzzer)
@ DC 12V Working Voltage, 70mA Working Current
@ 100 Meters Communication Distance
@ Real Time Data Transfer
@ Black Color
@ PVC Case Material (Black Resin for Water-Proof Function)
@ 109*88.4*34(mm)
Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires


If you want to ask anything just fill in the form below and send us. We will contact you within 12 hours.

Write a review

RFID Products
Contact

FEATURED PRODUCTS

Stand Alone Access Control RFID card reader for door entry systems
Stand Alone Access Control RFID card reader for door entry systems

Stand Alone Access Control RFID card reader for door entry systems

More >>
Mifare badge reader PIN Keyboard Card Reader
Mifare badge reader PIN Keyboard Card Reader

Mifare badge reader PIN Keyboard Card Reader

More >>
RFID proximity card reader kit  RFID card reader with keypad
RFID proximity card reader kit RFID card reader with keypad

RFID proximity card reader kit RFID card reader with keypad

More >>
Wiegand34 RFID Smart Card Reader Door Access Controller
Wiegand34 RFID Smart Card Reader Door Access Controller

Wiegand34 RFID Smart Card Reader Door Access Controller

More >>
Friend links: Scissor Lift manufacturers,